Adhesives and binders

Polyurethane Flooring Adhesive

Select the adhesive, binder or seaming tape together with the materials being joined and the approved system specification.

Polyurethane Flooring Adhesive is used to secure rubber, PVC or other resilient floor coverings approved in the technical data to suitable mineral substrates. Selection of a one- or two-component system depends on the covering backing, substrate, traffic, moisture and working conditions. The base must be sound, dry, clean and even, with primer used where required; trowel notch, open time, pot life, coverage and full cure values must be confirmed from current product documentation.

Polyurethane adhesive spread with a notched trowel beneath a resilient rubber floor covering

Selection and technical review

State the turf backing, tape, granule or floor-covering type, substrate, environment and application area. Verify components, mixing ratio, consumption, pot life and curing conditions against the current TDS, and safety and storage against the SDS. Different chemical families are not automatically interchangeable.

Application and handover preparation

Check substrate preparation, compatibility, weather and application sequence against the technical instructions. Link trial application and batch records to project control; do not open a joint or surface to use before the specified curing and acceptance conditions are met. Seaming tape is not an adhesive on its own.