Adhesives and binders

Artificial Turf Seam Adhesive

Select the adhesive, binder or seaming tape together with the materials being joined and the approved system specification.

Artificial Turf Seam Adhesive is an installation product used with a compatible jointing tape to create a permanent bond between adjacent turf rolls. Compatibility with the turf backing and tape, one- or two-component format, trowel notch and coverage must be selected from the current technical data. Before installation, surfaces should be dry and clean, while substrate temperature, humidity, open time, working time and curing conditions must be checked against actual site conditions.

Adhesive being spread with a notched trowel over jointing tape between artificial turf rolls

Selection and technical review

State the turf backing, tape, granule or floor-covering type, substrate, environment and application area. Verify components, mixing ratio, consumption, pot life and curing conditions against the current TDS, and safety and storage against the SDS. Different chemical families are not automatically interchangeable.

Application and handover preparation

Check substrate preparation, compatibility, weather and application sequence against the technical instructions. Link trial application and batch records to project control; do not open a joint or surface to use before the specified curing and acceptance conditions are met. Seaming tape is not an adhesive on its own.